Metallic; Non-Metallic; Hazardous Waste; Permanent Magnets - ABB AMXE132 Motors Instructions Manual

WAsTE dIsposAl And rECyClIng

2.8. Metallic

1. HV connectors
2. LV connector housing

2.9. Non-Metallic

1. Parts in winding
2. Parts in connection box
3. Shaft seal
4. O-rings
5. Cable insulation
6. Parts in resolver
7. Parts in connectors
2.10.

Hazardous waste

2.11. Permanent magnets

Magnets need to be removed and recycled. Removal is only performed in a specialized (ABB) Service
Center and will be according to instructions developed for this purpose.
Warning - Grease handling
The grease from the bearings is to be considered as hazardous waste and must be
taken care of according to regulations.
9