Silvercrest KH 2173 Operating Instructions Manual page 9

b) Setting the date
• Press the button MODE
is shown in the display, e.g. "1".
• Press repeatedly on the button SET
correctly shown, e.g. "12".
• Press the button MODE
is shown in the display, e.g. "1".
• Press repeatedly on the button SET
correctly shown, e.g. "31".
c) Setting the clock
• Press the button MODE
is shown in the display, e.g. "1: A". Ensure that the indicator "AL" does not
appear, as you would then be setting the alarm time, not the time display itself.
• Press repeatedly on the button SET
e.g. "10: A". The letter "A" behind the number indicates "AM" (morning),
"P" indicates "PM" (afternoons) and "H" signifies a 24 hour time display.
• Press the button MODE
is shown in the display, e.g. ":01". Ensure that the indicator "AL" does not
appear, as you would then be setting the alarm time, not the time
display itself.
• Press repeatedly on the button SET
shown, e.g. ":15".
d) Starting the clock
• Press the button MODE
display the time, e.g. "10:15".
• Press the button SET
clock. As a control, the double-point in the display starts to blink.
once again, until only the number for the month
until the figure for the month is
once again, until only the number for the day
until the figure for the day is
once again, until only the number for the hours
until the hour figure is correctly shown,
once again, until only the number for the minutes
until the minute figure is correctly
to accept the programmed minutes and to
to accept the programmed time and to start the
- 7 -