Mode 5 - Printing All <Normal - FujiFilm DRI-CHEM NX10N Instruction Manual

8 Mode Settings and Functions
8.7 Mode 5 - Printing all <Normal>
This mode is used to perform batch printing of routine test data or control data.
NOTE: If the external printer is connected, the data can be printed.
8
8-12
START
MODE
Select
MODE RERUN
START
Printing all is
complete
or
Quits Mode
(1) Enter into Mode 5.
NOTE: After a beep sounds and the message is dis-
played about two seconds, the analyzer quits
the mode operation:
If the test data do not exist.
If the printer is not connected.
(2) Select the test data.
(a) Select routine test data or control data.
Select [Routine test data] or [Control data] by
the scroll keys
key.
NOTE: The shaded part is a selected menu.
Batch printing is started.
NOTE: During printing, press the C (clear) key to can-
cel printing and return to the mode selection
dialog.
When the batch printing is completed, the ana-
lyzer returns to the test result dialog.
897N120152H FDC NX10N Instruction Manual 04.2022
, then press the ENTER