Mode 4 - Checking Test Data <Normal - FujiFilm DRI-CHEM NX10N Instruction Manual

8.6 Mode 4 - Checking Test Data <Normal>
This mode is used to check the routine test data or control data.
MODE
Test Result Screen
[Routione Test Data]
[Control Data]
897N120152H FDC NX10N Instruction Manual 04.2022
START
Select
MODE RERUN
START
Select
MODE RERUN
START
8 Mode Settings and Functions
(1) Enter into Mode 4.
NOTE: After a beep sounds and the message is dis-
played about two seconds, the analyzer quits
the mode operation:
If the test data do not exist.
To display the test data ......................................... (2)
To transmit the test data ....................................... (3)
To print out the test data ....................................... (4)
NOTE: If the external printer is connected, the data can
be printed.
(2) Display the test data.
(a) Select the routine test data or control data.
Select [Routine test data] or [Control data] by
the scroll keys
key.
NOTE: The shaded part is a selected menu.
The test result dialog is displayed with routine
test data or control data.
NOTE: If measurement is performed in the control
mode, the indication [Control] appears in the
test result dialog. The reference interval is not
displayed.
: The message is displayed when the individual
test data is broken.
If the test data is broken.
Move to other individual test data by the scroll
keys .
(b) Select the test data you want to check.
Select the test data you want to check by the
, then press the ENTER key.
scroll keys
, then press the ENTER
8-9
8