2.2 Names and Functions of Display and Keyboard
2.2.1 Display
2.2.2 Keyboard
START
897N120152H FDC NX10N Instruction Manual 04.2022
2 Component Names and Functions
The display shows operation procedures or equip-
ment status.
[ID]
Displays sample ID.
[LotNo.]
Displays the slide production lot number by
reading the QC card.
[Countdown]
Displays remaining time (mm : ss) before the
test is complete. It counts down by 10 seconds
for a minute to go, by a second for less than a
minute to go.
Keyboard
MODE
RERUN
START
START/ENTER key
START
A test starts.
ENTER
The ENTER confirms the input numbers,
mode operations, etc.
C (Clear) key
The C (Clear) key is used for deleting incorrect
input data.
This key is also used for terminating the select-
ed mode operation and for clearing the error
from the display.
2
2-3