Channel:set <Nrf; Channel:voltage[:Enable] <Bool - ITech IT5102 Programming Manual

NR2: Disable or enable, 0~255（IT5102E） ，0~65535(IT5102)
Example
RES:GROU 1,7
Query Syntax
RES:GROU?
Return Parameters
<NR1>,<NR2>
Relevant Command
RES:GROU?
CHANnel:SET <NRf>
This command selects channel, seting the parameter after select the channel
number.
Command syntax
CHANnel:SET <NRf>
Parameters
1~136 (IT5102E), 1~272 (IT5102)
Example
CHAN:SET 1
Query Syntax
CHANnel:SET?
Return Parameters
None
Relevant Command
CHAN:SET?
CHANnel:VOLTage[:ENABle] <bool>
This command sets the voltage measurement function to enable or disable for
corresponding channel.
Command syntax
CHANnel:VOLTage[:STATe] <bool>
Parameters
0|1|ON|OFF
Copyright© Itech Electronic
Configuration Commands
Co., Ltd. 14