Table of Contents
Advertisement
Set-Up
Hose Attachment
1.
Engage the trigger lock.
Rotate trigger lock
to stop the trigger
from being activated.
2.
Attach the (black p/n 21694-25) material hose to
the material inlet fitting on the back of the gun.
3.
Attach the (yellow p/n 236) solvent line to the solvent
inlet fitting on the back of the gun.
GC-1306S
4.
Attach the (stainless steel p/n 20190-00) catalyst hose
to the catalyst inlet fitting on the back of the gun.
5.
If the optional fiberglass roving chopper is being used,
attach the "red" chopper air line to the chopper air
inlet fitting on the back of the gun.
7
Advertisement
Table of Contents
