Attaching The Pacrac+ Fixing Poles To A Powerx (Uk) - Ferno PacRac+ FWEPR+ IT User Manual

4.3 Attaching the PacRac+ Fixing Poles
to a POWERX (UK)
The PacRac+ is attached to POWERX (UK) using 2 extension poles
which are attached at the foot-end of the cot, fitted into the push-
pole storage frame.
PacRac Fixing Kit for POWERX (UK) (009010150)
Parts Included
Front-foot mount
Extension Pole (Left Hand)
Extension Pole (Right Hand)
M6x25 CSK SCS with nylon patch
Tools Required
4 mm Hex wrench
1. Remove the trolley push poles from the storage frame at the
foot-end at each side of the cot.
2. Place a PacRac+ fixing extension pole into the storage frame
at each side (Figure 13), pushing the pole in far enough so that
the hole in the trolley frame lines up with the fixing hole in the
extension pole.
3. Using a 4mm hex wrench and the screws supplied, attach the
foot-mount to the top of the trolley frame, screwing through
the hole into the extension pole that is located inside the
storage frame (Figures 13 and 14).
4. Once the extension poles have been fixed tight in place, the
PacRac+ can be attached to the cot (Figures 15 - 17).
© Ferno-Washington, Inc. / 00148-AU-V4 / AUG 2021
Setup
Qty.
2 ea.
12
1 ea.
1 ea.
2 ea.
Qty.
1 ea.
13
15
16
Front-foot Mount (2) Extension Poles LH/RH (2)
M6x25 CSK SCS (2)
14
17
11