Advertisement
Chapter 2 Installation Guide
Open the product package
Confirm that the box contains :
• RFID devices
• 2 mounting screws
• 2 pieces of mela screw cover
• Quick installation guide
Remove all protective materials from the device.
Check the device for signs of damage.
If the device is damaged or missing any of the parts listed above, report them immediately.
Product installation
Note: The following images may vary for different products.
User manual: KIT-NFC-LF/HF-EDGE CONNECT
Step 1: Select location to mount the RFID
device.
Step 2: Remove the selected peripheral
interface cover from the side of the main
device.
Page 5 of 20
Advertisement
