Panasonic GA-AS16TPoE+ Manual page 18

Screen Description
System Informa- Displays the operating time and firmware version of this switch.
tion
Operating Time
Boot Code Ver-
sion
Runtime Code
Version
Hardware Displays the hardware information.
Serial Number
Hardware Ver-
sion
DRAM Size
Flash Size
Management Configure the items shown here in accordance with Section 5.1.1 "Administra-
tion Configuration."
Host Name
System Address Configure the items shown here in accordance with Section 5.1.2 "IP Config."
MAC Address
IP Address
Subnet Mask
Default Gate-
way
Displays the cumulative time since the power on of this
switch.
Displays the firmware version of this switch. * The firmware
update described in Section 5.3.1 is available only for run-
time codes.
Displays the serial number of this switch.
Displays the hardware version.
Displays the size of the installed DRAM.
Displays the size of the installed Flash memory.
Displays the switch name. The factory default setting is
blank. For configuration details, refer to Section 5.1.1.
Displays the MAC address of the switch. This value is
uniquely assigned to each device and cannot be changed.
Displays the switch's current IP address. The factory default
setting is "0.0.0.0". For configuration details, refer to Section
5.1.2.
Displays the switch's current subnet mask. The factory
default setting is "0.0.0.0". For configuration details, refer to
Section 5.1.2.
Displays the IP address of the router for the default gate-
way. The factory default setting is "0.0.0.0". For configura-
tion details, refer to Section 5.1.2.
18