Panasonic GA-AS16TPoE+ Manual page 60

Event Displays the description of the event that occurred on this switch.
Start monitoring func-
tion
Stop monitoring func-
tion
SNTP first update to
yyyy/mm/dd hh:mm:ss
No response from SNTP
server.
Detect the storm. (DLF)
Detect the storm. (Mul-
ticast)
Detect the storm.
(Broadcast)
System Cold Start
Port- xx Link-up
Port- xx Link-down
Copied configuration 2
to 1
Copied configuration 1
to 2
Reset configuration 1 &
2 to default
Copy confgiuration 2 to
1 is failed
Copy configuration 1 to
2 is failed
Save of configuration 1
is failed
Save of configuration 2
is failed
Set IP via ipsetup inter-
face (IP:xxx.xxx.xxx.xxx)
Failed to set IP via
ipsetup interface
Changed user name
Changed password
Runtime code changes
Configuration file
upload
Configuration file
download
Reboot: Normal
Reboot: Factory Default Indicates that this switch was rebooted to return settings to
Reboot: Factory Default
Except IP
Start reboot timer
(xxxxx sec)
Cleared system log.
Indicates that the port monitoring function was enabled.
Indicates that the port monitoring function was disabled.
Indicates that this switch accessed the SNTP server to
retrieve time information.
Indicates that this switch could not access the SNTP server.
Indicates that the storm control was worked by DLF storm.
Indicates that the storm control was worked by Multicast
storm.
Indicates that the storm control was worked by Broadcast
storm.
Indicates that this switch powered on.
Indicates that port link was up. This event occurs when Indi-
vidual Trap is enabled and a target port is set.
Indicates that port link was down. This event occurs when
Individual Trap is enabled and a target port is set.
Indicates that copied configuration 2 to invalid configura-
tion 1.
Indicates that copied configuration 1 to invalid configura-
tion 2.
Indicates that configuration 1 and 2 were resetted to fac-
tory default setting.
Indicates that failed to copy configuration 2 to configuar-
tion 1.
Indicates that failed to copy configuration 1 to configuar-
tion 2.
Indicates that failed to save configuration 1.
Indicates that failed to save configuration 2.
Indicates that IP address was set by the specific host via IP
setup tool.
Indicates that IP address was failed to set via IP setup tool.
Indicates that user name was changed.
Indicates that password was changed.
Indicates that the firmware was changed.
Indicates that the configuration file was transferred from
the TFTP server.
Indicates that the configuration file was transferred to the
TFTP server.
Indicates that this switch was rebooted.
factory default.
Indicates that this switch was rebooted to return settings
except the IP address to factory default.
Indicates that reboot timer was started and will reboot
after xxxxx sec.
Indicates that system logs are cleared.
60