Panasonic GA-AS16TPoE+ Manual page 16

When the above information has been authenticated properly, the screen shown
in Figure 4-2 will appear for selecting a display language.
Select the type of the language in which you want to show menus, and press "OK."
The left side of the screen shows a list of actions that you can perform on this
screen.
(1) General Information:
Displays a list of basic information of this switch.
(2) Basic Config:
Configure the basic settings such as IP address and port settings.
(3) Advanced Config:
Configure the advanced function settings such as VLAN, QoS, and port moni-
toring.
(4) System Tools:
Management tools to update the firmware and browse system logs.
To conduct operation management, it is recommended that you first configure
settings for the "Basic Config" and then configure other advanced settings.
Figure 4-2 Select Display Language
16