Table of Contents
Advertisement
Acessa
ProVu System User's Guide
®
Menu Setttings
10.4.
•
Access menu settings when the Menu button is pressed or there are any alert messages.
Display
Mode
Display Mode – Switch between Ultrasound plus Guidance mode or full Ultrasound only mode on screen.
•
•
3D Ablation Cage Mode – This mode turns the optional 3D Ablation Cage ON or OFF. This tool is used to approximate
the expected fibroid size to be ablated.
Coag Level – This allows the user to select the Coag power level. The range is 1 – 20.
•
•
OR Layout – This allows the user to select one of the four (4) OR layout options.
Sound Level - This allows the user to select the sound output power level. The range is 1 – 15. The sound level cannot
•
be changed for alert notification sounds.
•
Pressing the Menu button once on the front panel will activate the menu items and pressing a second time will minimize
the menu.
Menu Button
10.5.
Ultrasound Settings
•
Access to the Ultrasound settings is via the front panel of the Console.
•
Depth – The Depth (magnification) options are: 3cm, 4cm, 5cm, 6cm, 7cm, 8cm, and 9cm.
•
Frequency – The Frequency (penetration/resolution) options are: 5MHz, 6MHz, 9MHz, and 12MHz.
Gain – The Gain (brightness) options are: 0 – 100%, in 1% increments.
•
•
Focus – The Focus (near zone/far zone) options are: 0.2cm, 0.4cm, 0.7cm, 1cm, 1.4cm, 1.8cm, 2.3cm, 3cm, 4cm, and
5cm.
10.6.
Expected Ablation Size
A pictorial representation of the expected ablation based on the user Handpiece deployment; Correlates with the tables
•
on §12.3 and §12.4. The ablation size in centimeters. (length x width).
10.7.
Deployment, Ablation and Coag
•
Deployment: Displays the amount of deployment of the electrode arrays in centimeters.
Target ablation time: Target time is set based on the Handpiece deployment settings chosen.
•
•
Ready-Ablate State: In Ready-Ablate State (Figure below), the upper left-hand frame has a yellow outline. The
Handpiece temperature (in Celsius) and power (in Watts) are also displayed. The user will use the left foot pedal
(yellow) to activate ablation when ready. The yellow highlight indicates the Ready-Ablate state visually to the user.
CO 20-131 Revision: C
3D Ablation
Cage Mode
Scroll Buttons
Target Ablation Time
Current Time
Coag
OR
Level
Layout
Accept/Acknowledge
PL-01-0040
Sound
Level
Button
15
Advertisement
Table of Contents
