Yamaha XMAX 2022 Owner's Manual page 36

Instrument and control functions
F Trip → Oil Trip → V-Belt Trip → Odo
→ Trip → Trip Time → F Trip
To reset the fuel reserve tripmeter, se-
lect it by using the "TRIP" switch, and
then hold the "TRIP" switch for three
seconds.
The fuel reserve tripmeter will reset au-
tomatically and disappear after refuel-
ing and traveling 5 km (3 mi).
5
Oil change tripmeter "Oil Trip"
1
1. Oil change indicator "Oil"
2. Oil change tripmeter
The oil change tripmeter shows the
distance traveled since the oil was last
changed.
The oil change indicator "OIL" flashes
at the initial 1000 km (625 mi), then at
4000 km (2500 mi) and every 5000 km
(3125 mi) thereafter to indicate that the
engine oil should be changed.
After changing the engine oil, reset the
oil change indicator and the oil change
tripmeter. To reset them both, select
the oil change tripmeter, and then hold
the "TRIP" switch for three seconds.
While the oil change tripmeter is flash-
ing, hold the "TRIP" switch for 15 to 20
seconds. Release the "TRIP" switch,
and the oil trip value will reset to zero.
TIP
If the engine oil is changed before the
oil change indicator comes on (i.e., be-
fore the periodic oil change interval has
been reached), the oil change tripmeter
2
must be reset for the oil change indica-
tor to come on at the correct time.
5-6
V-belt replacement tripmeter "V-
Belt Trip"
1
1. V-belt replacement indicator "V-Belt"
2. V-belt replacement tripmeter
The V-belt replacement
shows the distance traveled since the
V-belt was last replaced.
The V-belt replacement indicator "V-
Belt" will flash every 20000 km (12500
mi) to indicate that the V-belt should be
replaced.
After replacing the V-belt, reset the V-
belt replacement indicator and the V-
belt replacement tripmeter. To reset
them both, select the V-belt replace-
ment tripmeter, and then hold the
"TRIP" switch for three seconds.
2
tripmeter