Table of Contents
Advertisement
Value (Denom) / Batch Setting
In this menu the coin values and batch stop of B1 are configured.
Using the keypad press the 1 key to enter the settings.
Press the1 Key to move the highlighted bar down to Denom/Batch setting
Press the 2 key to select the item and enter the menu as shown here:
Use the 0 key to move the selection highlighted bar down and use the 1 key to move the highlighted bar
left or right to select an item you want to change. Press the 2 key to Enter the selected value to change it.
Press "M" to set the value or batch to the correct setting. Example: 0025 for 0.25 coin.
Press the "M" to save the value. *Note: if a mistake is made you can press "C" which will
clear the value. This clear feature works for both Denom and Batch mistakes.
After you have made all required adjustments, Press the ON/OFF to exit to the menu screen
and press it again to enter to the main counting screen.
1
CUMMINS ALLISON, A CPI BRAND 3350 Ridgeway Drive, Unit 3, Mississauga, Ontario L5L 5Z9
www.cranepi.com Tel: 1-800-499-6191
13
Advertisement
Table of Contents
