Advertisement
Operation instructions
1. Switching the device on/off
•
Switching it on: Plug the mains plug into the socket and tilt the
switch into the "–" position to switch the multi-functional cleaner
on.
•
Switching it off: Tilt the switch in the "O" position to turn the
cleaner off.
2. Installing the hose
Place the hose on the required connection and turn it clockwise. Close
the remaining connection with the cap.
3. Mounting the handle to the telescopic bar
Place the handle in the telescopic bar and turn it clockwise to orevent it
from sliding off.
4. Mounting the floor brush to the telescopic bar
Place the floor brush in the telescopic bar and turn it clockwise to pre-
vent it from sliding off.
5. Installing the front wheels
Tilt the cleaner, as seen in fig. 5 and install the wheels in the designated
intake.
6. Cable drum
The intake for the mains cable is located under the push handle. Unwind
the cable entirely when using the device.
7. Storing the equipment
On the upper side of the device, there are two intakes to store the equip-
ment.
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Item 62641
Page 6
01
2022-1
Advertisement
