Advertisement
8. Blow-out function
On the front, there is a hose intake for the blow-out function. Place the
hose on the connection and turn it clockwise.
9. Tapping function for cleaning HEPA filter
Use the telescopic bar to remove the dust in the HEPA filter by tapping
it. The fixture can be found on the top, next to the handle. If there is a
power loss, we recommend tapping the filter 3–5 times.
10. Inserting the vacuum cleaner bag
Open the clear cover and insert the vacuum cleaner bag.
11. Exchanging or emptying the vacuum cleaner bag
Open the clear cover and exchange or empty the vacuum cleaner bag.
12. Taking the top off
Release the quick coupling on each side and lift the top.
13. Replacing the HEPA filter
After removing the top, as described in step 12, the HEPA filters can
easily be placed or exchanged.
14. Cleaning the HEPA filter
Remove the filter from the vacuum cleaner and clean it under a water
stream. Let the filter dry and re-place it.
15. Cleaning the equipment and connections
Remove the equipment to be cleaned and clean it thoroughly under run-
ning water. Then, re-mount it or store it in the designated intakes.
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Item 62641
Page 7
01
2022-1
Advertisement
