Kelvinator KSV25HWJ User Manual page 11

1
3
FAN Mode
1. Press the MODE button to select FAN mode.
2. Press FAN button to select the fan speed:
AUTO, LOW, MED or HIGH.
3. Press the ON/OFF button to start the unit.
NOTE: You can't set temperature in FAN mode.
As a result, your remote control's LCD screen
will not display temperature.
1
4
2
3
DRY Mode (dehumidifying)
1. Press the MODE button to select DRY.
2. Set your desired temperature using the TEMP
button.
3. Press the ON/OFF button to start the unit.
NOTE: FAN SPEED cannot be changed in DRY mode.
2
HEAT Mode
1. Press the MODE button to select HEAT mode.
2. Set your desired temperature using the TEMP
button.
3. Press FAN button to select the fan speed:
AUTO, LOW, MED or HIGH.
4. Press the ON/OFF button to start the unit.
NOTE: As outdoor temperature drops, the performance of
your unit's HEAT function may be affected. In such instances,
we recommend using this air conditioner in conjunction with
other heating appliances.
1
3
2
How to Use Basic Functions
or TEMP
or TEMP
11