Table of Contents
Advertisement
OPERATION
3.5 Output From Inverter to PROFIBUS
You can monitor the following items:
Availability of monitor depends on the inverter. Refer to the inverter
manual for details.
• Output Frequency
• Output Current
• Output Voltage
• Frequency Setting
• Running Speed (r/min)
• Motor Torque
• Converter Output Voltage
• Regenerative Brake Duty
• Electronic Overcurrent Protection Load Factor
• Output current peak value
• Peak Voltage
• Input Power
• Output Power
• Input Terminal
• Output Terminal
• Load Meter
• Motor Excite Current
• Position Pulse
• Cumulative Energy Time
• Orientation Status
• Actual Operation Time
• Motor Load Factor
• Cumulative Power
Refer to page 21 for more details.
For parameter reading, all standard and special parameters are
supported.
All available parameters are readable all the time, regardless of special
settings that may be needed to read parameters using the PU or other
communications option cards (e.g., PNU 3Dh to 40h and C9h to E6h).
12
Advertisement
Table of Contents
