Table of Contents
Advertisement
5 OPERATION
setting may need to be increased. Always check the roller pressure setting on a case-by-case basis by
feeding out the wire against an insulated object as described above. A table showing approximate
settings can also be found on the inside of the left door of the wire feeder.
Wire material
Fe, Ss
Cored
1 Tensioner unit 1
0446 680 001
Wire diameter (in.)
(mm)
Tensioner unit 1
Tensioner unit 2
Tensioner unit 1
Tensioner unit 2
2 Tensioner unit 2
- 21 -
.023
.030
.070
0.6
0.8
1.8
Pressure setting
2.5
3–3.5
5/64
3/32
2.0
2.4
2
2.5–3
© ESAB AB 2021
Advertisement
Table of Contents
