Delivery Set; Technical Specifications - Maxwell MW-2112 BK Manual Instruction

ENGLISH
–
Attention! Use only the oil supplied
with the unit.
DO NOT USE vegetable oil, fat, oil
mixed with any solvents for lubricating.
Solvents are subjected to evaporation,
leaving thick oil which may slow down
the blades motion.
Cleaning the hair clipper
–
–
–
–
–
STORAGE
–
–
M_MW-2112_100 x140_2 var.indd 14
Switch the unit off, clean the excess
oil with a dry cloth.
Switch off and unplug the unit.
Clean the blades from hair, using
the cleaning brush (11).
Wipe the accessories and the unit
body with a slightly wet cloth, and
then dry them with a soft cloth.
Do not immerse the unit into water
or any other liquid.
Do not use solvents or abrasives for
cleaning the unit.
Before taking the unit away for
storage, clean and lubricate the
blades (3, 4) with lubricating oil (10).
Keep the unit in a dry cool place, out
of reach of children.

DELIVERY SET

Hair clipper (with blades) – 1 pc.
Attachment comb – 4 pc.
Lubricating oil – 1pc.
Cleaning brush – 1 pc.

TECHNICAL SPECIFICATIONS

Supply voltage: 230 V ~ 50 Hz
Power consumption: 7 W
The manufacturer preserves the right
to change the specifications of the unit
without a preliminary notification.
Unit operating life is 3 years
Guarantee
Details regarding guarantee conditions
can be obtained from the dealer from
whom the appliance was purchased.
The bill of sale or receipt must be pro-
duced when making any claim under
the terms of this guarantee.
This product conforms to the
EMC-Requirements as laid
down by the Council Directive
2004/108/ЕС
Low Voltage
(2006/95/ЕС)
14
and to the
Regulation
19.08.2016 9:19:26