Cleaning And Care; Delivery Set; Technical Specifications - Maxwell MW-2114 GR Manual Instruction

• After you finish cutting hair switch the hair
clipper off by setting the switch (4) to the
position «0»; if the unit is powered by the
power adapter (7), unplug it.
•
Remove the attachment (1) and clean it off
hair, remove the blade block (2) and clean it
with the brush (9).
•
Lubricate the blade block (2) with a drop of
oil (10).

CLEANING AND CARE

Switch the hair clipper off after using it.
–
Remove the telescopic attachment (1).
–
Clean the telescopic attachment (1) off hair
–
with the brush (9).
Remove the blade block (2).
–
Clean the blade block (2) and the inner cavity
–
under the blade block (2) with the brush (9).
Do not wash the inner cavity of the hair clip-
per under a water jet.
Clean the hair clipper body with a soft, slight-
–
ly damp cloth, and then wipe it dry.
Never immerse the hair clipper, the power
–
adapter (7) and the power adapter cord into
water or other liquids.
Never use solvents or abrasives to clean the
–
hair clipper body and attachments.
Lubricate the blade block (2) after every use
–
with the lubricating oil (10).
STORAGE
Clean the unit and lubricate the blades with
–
lubricating oil (10) before taking it away for
storage.
– Keep the unit away from children in a dry
cool place.
MW-2114.indd 11

DELIVERY SET

Hair clipper – 1 pc.
1.
Telescopic attachment – 1 pc.
2.
Power adapter – 1 pc.
3.
Lubricating oil – 1 pc.
4.
Cleaning brush – 1 pc.
5.
Instruction manual – 1 pc.
6.
Charging base – 1 pc.
7.

TECHNICAL SPECIFICATIONS

Built-in rechargeable battery:
1 x NiMh 800 mAh - 4.5 V
Power supply of the power adapter: 220-240 V
Output voltage: 50 Hz
The manufacturer preserves the right to change
the specifications of the unit without a prelimi-
nary notification.
Unit operating life is 3 years
Guarantee
Details regarding guarantee conditions can
be obtained from the dealer from whom the
appliance was purchased. The bill of sale or
receipt must be produced when making any
claim under the terms of this guarantee.
This product conforms to the EMC
Directive 2014/30/EU and to the Low
Voltage Directive 2014/35/EU.
11
ENGLISH
27.07.2017 14:21:25