Settings Status; Figure 14. Sample Settings Status Report; Table 17. Settings Status Report Terms - Wegener UNITY500 Manual

UNITY 500
A.1.3.8

Settings Status

SETTINGS STATUS
Carrier:
Data Rate:
FEC Rate:
Tag Site:
Program:
MESSAGE
Term Description
TEMP
The temp_settings, w/ time_string(timer.insert_remaining) is shown at top. {'-'s are shown and
time is left blank when not inserting}.
PERM The perm_settings.
SEARCH The search_settings. {'-'s are shown if not searching}.
Carrier Downlink carrier frequency in MHz.
Data Rate Transport data rate in Mbps.
FEC Rate Any of the supported FEC ratios (inner FEC)
Tag Site 0-15. See section 3.5.
Program Selected program. If selected program is '*', then actual program identifier is shown, if available.
Otherwise, Program # is shown.
MESSAGE If the current condition indicated on the LED is a boot fail, alarm, or warning condition, this line
will contain a brief description of that condition. Boot Fail & Alarm descriptors will be identical
to those used on OSD for alarm muted video.

Figure 14. Sample Settings Status Report

TEMP
(00:18:53)
12000.11
1.536
3//5
0
* (EAST)

Table 17. Settings Status Report Terms

Page 49 of 56
PERM SEARCH
12000.11 -
10.000 -
3/5 -
2 -
* -
Page 49
800001-01