Table of Contents
Advertisement
Page 48
A.1.3.6
MPEG
Aggregate MPEG:
Available Programs:
Video
Presence:
Settings:
Audio Presence:
Audio Port Assignments: / Status:
Program ATTEN
A01(PRI)
Term
Aggregate MPEG
Available Programs
Video
Presence
Settings
Audio Presence
Audio Port
Program
Routing
Left/Right
A.1.3.7
Relay Status
Relay
Setting
800001-01
Figure 12. Sample MPEG Status Report
Transport stream at 10.000 Mbps
00001, 00002
NTSC
ALARM MUTED, COMMAND MUTED
A01, ENG, SPA, FRE, . . . . . ., ITA, SP2, E3
Routing
Left
10 dB
STEREO
Table 16. MPEG Status Report Terms
Description
If MPEG stream is present, shows Transport stream at data_rate Mbps, obtained from
active_settings. If MPEG stream is NOT present, shows "Not Available."
Program numbers of available programs if MPEG stream is present
NTSC, Not Authorized, or Not Present.
If both video.alarm_state and video.cmd_state are unmuted, then NORMAL.
Otherwise, any non-muted states will be shown.
Shows 3 character designator for each audio program contained within the current
program, if MPEG stream is present.
In UTY500, only one audio port is possible.
The audio program that was specified for the audio port. If the unit automatically picks
the audio program, the chosen program will be shown in ( ).
The value in audio.port.route and can be "STEREO", "1 ON BOTH" (meaning Left to
both), "2 ON BOTH" (meaning Right to both), or "REVERSE".
The status of the port's individual audio component outputs. Can be '-', CMD,
ALARM, or ALARM&CMD depending on states of audio.output.cmd_muted and
audio.outputs.alarm_muted.
Figure 13. Sample Relay Status Report
List of user relays
OPEN or CLOSED. Current state of each relay
Page 48 of 56
Right
ALARM/CMD MUTE
UNITY500
ALARM MUTE
Advertisement
Table of Contents
