Serial Port Select - Wegener UNITY500 Manual

Page 30 UNITY500
2.7.7

Serial Port Select

Serial Port Select From the main menu:
1. Press <SELECT> to scroll through the menu until "SERIAL PORT" is highlighted.
2. Press <ENTER> to move to the available device options for the serial port (Terminal,
Modem, Printer, or Aux Data).
3. Press <SELECT> to move through the options until the desired one is highlighted.
4. Press <ENTER> to edit selection
5. Press <ENTER> until desired value is seen.
6. Press <SELECT> to move to 'Activate Selection.'
7. Press <ENTER> to save your selections to memory.
8. Press <SELECT> to move to 'Return To Main Menu."
9. Press <ENTER> to return to main menu.
SERIAL PORT SELECT
Device: Printer
Activate Settings
Return to Main Menu
800001-01 Page 30 of 56