System Setup - Sylvania SDVD9070 Manual

SYSTEM SETUP

Setting Menus:
In fully stop mode, press and hold the SETUP Button on the unit or press the SETUP Button on remote
control, the setting menu will appear as below.
Using the Direction
Press the OK Button to enter or confirm the selection. After setting, press and hold the SETUP Button
on the unit or press the SETUP Button on remote control to save the settings and exit.
In General Setup Page:
1. If TV Shape is selected, using the Direction and OK Button to set the aspect ratio to match the
connected TV.
2. If Angle Mark is selected, using the Direction and OK buttons to set it
when multi-angles are available in the playing DVD,
3. If OSD Lang (On Screen Display Language) is selected, using the
to set the OSD language as desired.
4.
If Captions is selected, using the Direction and OK Buttons to set it On or Off. If set to On, when
captions available on the playing DVD, it will
5. If Screen Saver is selected, using the Direction and OK Buttons to set it On or Off. If set to On,
screen saver will come when the unit idles
If Last Memory is selected, using the Direction and OK Buttons to set it On or Off. If set to On,
6.
the unit will start playback from the position where the disc was stopped last time.
In Spea k er Setup Page:
If Downmix is selected, using the Direction and
If set to Lt/Rt, the rear left or rear right channel will play on both Left and Right Speakers.
If set to Stereo, the rear left channel will play on Left Speaker; the rear right channel will
play on Right Speaker.
◄, ►, ▲, ▼
Buttons to select and highlight the function you need to set or reset.
- - General Setup Page - -
TV Shape
Angle Mark
OSD Lang
Captions
Screen Saver
Last Memory
Go To General Setup Page
Wide
On
Eng
Off
On
Off
the multi-angle logo will appear on screen.
shows on the screen automatically.
or the image is paused for approximately five minutes.
Buttons set it
OK
18
On or Off. If set to On,
Direction and OK Buttons
to Lt/Rt; Stereo.