System Setup; Power Resume - Sylvania SDVD9019-B Manual

Press the SETUP Button, the setting menu will appear on the screen as below. During setting, using Direction
◄, ►, ▲, ▼
Buttons to select and highlight the function needed to set or reset. Press the ENTER/ OK Button
to enter or confirm the selection. After setting, press the SETUP Button to save the settings and exit.
S Y S T E M S E T U P:
1. If TV System is selected, it can be set to NTSC, PAL or AUTO to match the connected TV.
2. If POWER RESUME is selected, if set it On,the unit will start playback from the position where the disc was
stopped last time.
3. If Screen Saver is selected, if set to On, the screen saver will come on when the unit idles or the image is
paused for several minutes.
4. If TV type is selected, set the aspect ratio to match the connected TV.
5. If Password is selected, press the
"0000" to unlock the rating, press ENTER/OK button to confirm. Now the lock status will be
To change a new password, highlight the password column and enter a new four digit password under
unlocking status, press ENTER/OK button to confirm password changing. After password is changed,
the new password and default password can be used.
6. If Rating is selected, press the
rating level, then press ENTER/OK button to confirm setting.
~ Rate levels:
KID SAFE: Kid safe
G: All ages
PG: Parental Guidance
PG 13: Parental Guidance less than 13 years old
PG-R: Under 17 years old, Parental Guidance suggested
R: Under 17 years old, Parental Guidance strongly
NC-17: 17 years old or above
ADULT: Adult only
7. When Text to Speech is selected to ON, the player will have a voice during pressing each button, the default
is OFF.
8. If Default is selected and set it to restore, all settings will be restored to factory setting.

SYSTEM SETUP

SYSTEM SETUP
TV System

POWER RESUME

Screen Saver
TFT
TV Type
Password
Rating
Text to Speech
Default
►
button to highlight the
►
button to enter rating level, press
19
, then enter four digit default password
or button to select the desired
数字签名人 lxy
日期： 2017.08.01
10:38:38 +08'00'
.