Table of Contents
Advertisement
SYSTEM SETUP
In completely stop mode, press the SETUP Button on remote control, the setting menu will appear on the screen
as below. Using the Direction
Press the OK Button
to enter or confirm the selection. After setting, press the SETUP Button to save and exit.
In General Setup Page:
1.
If TV Shape is selected, using the Direction and OK Button to set the aspect ratio to match the
connected TV.
2.
If Angle Mark is selected, using the Direction and OK buttons to set it
multi-angles are available in the playing DVD,
3.
If
OSD Lang (On Screen Display Language) is selected, using the
OSD language as desired.
4.
If Captions is selected, using the Direction and OK Buttons to set it On or Off. If set to On, when the
captions available on the playing disc, it will appear on screen.
5.
If Screen Saver is selected, using the Direction and
screen saver will come on when the unit stops
6.
If Last Memory is selected, using the Direction and OK Buttons to set it On or Off. If set to On, the unit
will start playback from the position where the disc was stopped last time.
In Spea k er Setup Page:
If Speaker Setup is selected, press the
1.
If Downmix is selected, using the Direction and OK Buttons set it
~ If set to Lt/Rt, the rear left or rear right channels will play on both Left and Right Speakers.
~ If set to Stereo, the rear left channel will play on Left Speaker; the rear right channel will play on Right
Speaker.
◄, ►, ▲, ▼
Buttons to select and highlight the function you need to set or reset.
- - General Setup Page - -
TV Shape
Angle Mark
OSD Lang
Captions
Screen Saver
Last Memory
Go To General Setup Page
the multi-angle logo will appear on the screen.
Button, the sub-setting
OK
Wide
On
Eng
Off
On
Off
Direction and
OK
Buttons to set
or the image is paused for approximately five minutes.
menu will appear.
to Lt/Rt; Stereo.
18
On or Off. If set to On, when
OK
Buttons to set the
it On or
Off. If set to On, the
Advertisement
Table of Contents
