SYSTEM SETUP
Press and hold the SETUP Button, the setting menu will appear on the screen as below. During setting, using
◄, ►, ▲, ▼
Direction
Buttons to select and highlight the function you
Button to enter or confirm the selection. After setting, press the SETUP Button to save the settings and exit.
S Y S T E M S E T U P:
1. If Tv System is selected, it can only be set to NTSC, PAL or AUTO to match the connected TV.
2. If POWER RESUME is selected, if set it On,the unit will start playback from the position where the disc was
stopped last time.
3. If Screen Saver is selected, if set to On, the screen saver will come on when the unit idles or the image is
paused for several minutes.
4. If TV type is selected, set the aspect ratio to match the connected TV.
5. If Password is selected, press the
times to unlock the rating, press OK button to confirm. Now the lock status will be
(NOTE: MENU Button stands for "1", VOL+ for "2", VOL- for "3"), the default
To change a new password, highlight the password and press the "VOL+" or "VOL-" four times during
unlocking status to set new passwaord to "2222" or "3333", then press OK button to confirm changing.
6. If Password is selected, press the
rating level, then press OK button to confirm setting.
~ Rate levels:
1. KID SAFE:
Kid safe
2. G:
All ages
3. PG:
Parental Guidance
4. PG 13:
Parental Guidance less than 13 years old
5. PG-R:
Under 17 years old, Parental Guidance suggested
6. R:
Under 17 years old, Parental Guidance strongly
7. NC-17:
17 years old or above
8. Adult:
Adult only
7. If Default is selected and set it to restore, all settings will be restored to factory setting.
SYSTEM SETUP
TV System
POWER RESUME
TFT
Screen Saver
TV Type
Password
Rating
Default
►
button to highlight the
►
button to enter rating level, press
15
need to set or reset. Press the
, then press the MENU button four
.
password is "1111".
or
button to select the desired
OK