Sylvania SDVD9070 Manual page 17

USB or SD/MMC CARD PLAYBACK
1. Insert the USB Device or SD/MMC memory card into the USB port /card slot as the figure below.
NB: The unit supported to playback:
~ MP3; WMA (Music file)
~ JPG (Pictures)
etc.
Make sure correct files were saved in the USB device or memory cards.
2. In Power ON mode, press the USB/CARD Button on remote control, the "DVD, CARD, USB"
selection window will pop up on the screen. Using the Direction Buttons to select and highlight
the source then press the OK Button to confirm. Press the OK Button again, the Folder/
File list will appear, using the Direction button to select the desired file then press the OK
Button to start playback.
3. During playback:
~ Press the or
~ Press the or
~ Press the Button to pause. Press again to resume normal playback.
4. When finished, press and hold the STOP Button to stop. Press the STANDBY Button on remote
control to power off (Standby) the unit.
Button repeatedly to skip tracks.
Button repeatedly to select and set the fast searching speed.
17