Sylvania SDVD9070 Manual page 19

SYSTEM SETUP
In Video Setup Page:
1. If "Panel Quality" is selected, using the Direction and OK Buttons to set the panel quality such
like Sharpness; Brightness; Contrast; Hue or Saturation as desired.
2. If "Quality" is selected, using the Direction and OK Buttons to set the
Contrast; Gamma; Hue or Saturation
In Preference Setup Page:
1. If TV Type is selected, using the Di
(NOTE: The TV system in USA, Canada and Mexico is NTSC.)
2. If Audio, Subtitle or Disc Menu is selected, using the Direction and OK buttons to the priority of
the available language. ( Function depends on the recording of the DVD disc).
3. If Parental is selected, using the Direction and OK Buttons to set the rating level as follows:
►
Press the
▲
Press the
Press the OK Butons to enter, password enter window will pop up.
Enter the six digit password ( default password is 136900 ) by pressing the Numeric Buttons.
Press the OK Butons to save the settings and exit.
Rating levels:
1. Kid Saf: Kid safe
2. G: All ages
3. Pg: Parental Guidance
4. Pg13: Parental Guidance less than 13 years old
5. Pgr: Under 17 years old, Parental Guidance suggested
6. R: Under 17 years old, Parental Guidance strongly
7. Nc17: 17 years old or above
8. Adult: Adult only
4. If Password is selected, press the OK Button to enter, the subsetting menu will appear:
If Password Mode is selected, using the Direction and OK Buttons to set it On (activate the
rating level setting) or Off (Password is needed).
If Password is selected, press the OK Buttons twice to enter. The New password setting menu
will appear.
> Enter the six digit old password. The Column of New Password will be highlighted.
> Enter the new six digit password. The Column of Confirm Pwd will be highlighted.
> Enter the new password again. The OK Button on the screen will be highlighted.
> Press the OK Buttons to save the setting and exit.
5. If Default is selected, using the Direction and OK Buttons to reset all setting to default setting
or press and hold the SETUP Button on the unit or press the SETUP Button on remote control to
exit without changes.
rection and OK Buttons to set to
Button to enter, the current rating level will be highlighted.
▼
or Buttons to select the new level as desired.
of the Video input signal
19
Sharpness; Brightness;
as desired.
PAL, AUTO or NTSC.