Power Source - Sylvania SDVD9070 Manual

POWER SOURCE

Charging by supplied AC/DC Adaptor: Charging by supplied AC/DC Adaptor:
1. Connect the small plug from the supplied AC/DC Adaptor to the DC IN Jack on the right of unit.
2. Connect the AC/DC Adapter to the wall outlet having AC 100-240V~; 50/60Hz.
3. During charging, the Red indicator will light, when finished, it will turn Green.
Notes: Notes:
For saving energy, unplug the AC/DC Adaptor from wall outlet if unusing the unit for long period of time.
Your battery will last longer if you follow these simple guidelines for caring for and storing it.
A. Recharge and store the device within the temperature range of 5°C~35°C (40°F~95°F).
B. Do not overcharge (longer than 24 hours). Excessive charging or
the battery's life.
C. Battery life naturally shortens slowly over time.
Charging by the supplied Car Adaptor: Charging by the supplied Car Adaptor:
1. Connect to the cigarette lighter socket of a vehicle that has a 12V battery as the figure below.
It is It is NOT compatible with NOT compatible with
2. This is a special negative grounded
Car Adapter. Using this Car Adapter
with a plus grounded car can cause
malfunction.
3. Do NOT plug in the Car Adapter until
the car ignition is turned on.
4. Disconnect the Car Adapter from the
cigarette ligher and the unit after use.
To DC IN Jack on the unit
a vehicle that has a 24V battery. a vehicle that has a 24V battery.
12
discharging may shorten
To the cigarette
lighter socket