ABB eVM1 Installation And Service Instructions Manual page 40

Parameters Check: verifies that all Protection function parameters are within possible range.
Function useful after a change in The Nominal Primary Current value, when all ranges are modified.
It is automatically performed when downloading a configuration. A pop-up window signals the
protection functions and parameters possibly found not to be in the admissible range.
Reset Configuration: set all configurable parameters to the default ones, available at Configuration
Tool opening.This menu allows two choices.
Fig. 21
Reset Values Only: set all the parameter of the selected default configuration
Reset Values and Store to eVM1: set all the parameter of the selected default configurationand
transfers this configuration from PC to the electronic device (IED) if an active connectionis available
HW SW Versions: reads the HW and SW versions from the IED for compatibility check and
information to ABB service. Available when an active communication link has been established
with the IED.
Format Eprom: emergency function. This formats the Eprom memory for overwriting a new
configuration set.
Fig. 21a
38