Table of Contents
Advertisement
The arrows enable scrolling in each menù, the enter enables confirming the menù item choice, the
Menù pushbutton enables to return to the higher level selection.
The HMI is connected to the electronics on board the circuit-breaker by means of two bushing
conductors using the plug socket of the circuitbreaker itself.
The HMI has a universal power supply and it can be supplied with direct voltages from 24 to 250
Vdc or with alternating voltages at 50 and 60 Hz from 24 to 240 Vac.
Fig. 97
103
Advertisement
Table of Contents
