ABB eVM1 Installation And Service Instructions Manual page 102

Kit without HMI.
Consists of D-Sub 9-pin
connector for assembly on
DIN rail.
Fig. 90
Kit with HMI.
Consists of D-Sub 9-pin
connector for assembly on
DIN rail, HMI and serial
connection cable.
Fig. 91
100
14.10.1.4 Communication Kits
The communication kits are obligatory accessories provided with every eVM1 to allow communication.
They allow a communication port in a secondary compartment for each eMV1 which you can
connect up to with a PC with an optional Kit.
Two versions are available:
Kit without HMI. Consists of D-Sub 9-pin connector for assembly on DIN rail.
Kit with HMI. Consists of D-Sub 9-pin connector for assembly on DIN rail, HMI and serial
connection cable.