ABB eVM1 Installation And Service Instructions Manual page 24

22
4 - Cable for configuring eVM1 by means of HMI with RS232 – IRDA connection
(see para. 14.10).
Cable which allows the personal computer to be connected to the interface for the HMI panel to
configure the eVM1.
5 - Connection cable Kit for configuring the eVM1 when there is no HMI (see para.
14.10).
Kit which makes it possible to have an RS485 port in the low voltage compartment of the panel to
connect the personal computer to in those cases where there is no HMI.
6 - eVM1 RS232/USB – RS485 configuration cable (see para. 14.10).
Cable which allows the personal computer to be connected to the RS485 port prepared in the low
voltage compartment of the panel to configure the eVM1.