Stihl HLA 66 Instruction Manual page 40

English
– Degree of electrical protection: IPX4 (protec‐
tion against splash water from any direction)
HLA 86
– Permitted batteries:
– STIHL AP
– STIHL AR
– Weight without battery: 4.8 kg
– Degree of electrical protection: IPX4 (protec‐
tion against splash water from any direction)
The running time is shown at www.stihl.com/
battery-life.
20.2 Cutting blades
HLA 66
– Tooth spacing: 33 mm
– Cutting length: 500 mm
– Sharpening angle: 45°
HLA 86
– Tooth spacing: 33 mm
– Cutting length: 500 mm
– Sharpening angle: 45°
20.3 STIHL AP battery
– Battery technology: lithium-ion
– Voltage: 36 V
– Capacity in Ah: see rating label
– Energy content in Wh: see rating label
– Weight in kg: see rating label
– Permissible temperature range for operation
and storage: + 10 °C to + 50 °C
®
– Bluetooth radio interface (only for batteries
with ):
– Data connection: Bluetooth
mobile appliance must be compatible with
®
Bluetooth Low Energy 5.0 and support
Generic Access Profile (GAP).
– Frequency band: ISM band 2.4 GHz
– Maximum RF power transmitted: 1 mW
– Signal range: approx. 10 m. The signal
strength depends on the ambient conditions
and the mobile terminal. Signal range can
vary greatly depending on local conditions,
including the receiver. The range may be
perceptibly reduced inside enclosed rooms
and through metal barriers (such as walls,
shelves or cases).
– Mobile appliance operating system require‐
ments: Android or iOS (current version or
higher)
40
®
5.1. The
20.4 Sound Values and Vibration
Values
The K-value for the sound pressure level is
2 dB(A). The K-value for the sound power level is
2 dB(A). The K-value for vibration levels is 2
m/s².
HLA 66
STIHL recommends wearing ear defenders.
– Sound pressure level L
to ISO 22868: 80 dB(A)
– Sound power level L
ISO 22868: 91 dB(A)
– Vibration level a measured according to
hv
ISO 22867
– Control handle: 1.8 m/s²
– Loop handle: 2.3 m/s²
HLA 86
STIHL recommends wearing ear defenders.
– Sound pressure level L
to ISO 22868: 80 dB(A)
– Sound power level L
ISO 22868: 91 dB(A)
– Vibration level a measured according to
hv
ISO 22867
– Control handle: 1.6 m/s²
– Handle hose: 2.3 m/s²
The vibration levels indicated were measured
according to a standardized test method and can
be used as a basis for comparing electric power
tools. The vibration levels actually occurring may
vary from the values indicated, depending on the
type of application. The vibration levels indicated
can be used for an initial estimate of the vibration
stress. The actual vibration stress has to be esti‐
mated. The times can be taken into account in
the estimate when the electric power tool is
switched off and also when it is switched on but
not running.
For information on compliance with the Employ‐
ers' Vibration Directive 2002/44/EC see
www.stihl.com/vib.
20.5 REACH
REACH is an EC regulation and stands for the
Registration, Evaluation, Authorisation and
Restriction of Chemical substances.
For information on compliance with the REACH
regulation see www.stihl.com/reach.
20 Specifications
measured according
pA
measured according to
wA
measured according
pA
measured according to
wA
0458-185-9821-B