Functional Description; Installing Or Removing Battery Cartridge - Makita GA042G Instruction Manual

Important safety instructions for
w ireless unit
1. Do not disassemble or tamper w ith the w ire-
less unit.
2. Keep the w ireless unit a w ay from young chil-
dren. If accidentally s w allo w ed, seek medical
attention immediately.
3 . Use the w ireless unit only w ith Makita tools.
4 . Do not expose the w ireless unit to rain or w et
conditions.
Do not use the w ireless unit in places w here
5.
the temperature exceeds 50 ° C (122 ° F).
6. Do not operate the w ireless unit in places
w here medical instruments, such as heart
pace makers are nearby.
7 . Do not operate the w ireless unit in places
w here automated devices are nearby. I f o p e r -
ated, automated devices may develop malfunction
o r e r r o r .
Do not operate the w ireless unit in places
8.
under high temperature or places w here
static electricity or electrical noise could be
generated.
The w ireless unit can produce electromagnetic
9.
fields (EMF) but they are not harmful to the
user.
10. The w ireless unit is an accurate instrument. Be
careful not to drop or strike the w ireless unit.
11. Avoid touching the terminal of the w ireless
unit w ith bare hands or metallic materials.
12. Al w ays remove the battery on the product
w hen installing the w ireless unit into it.
1 3 . When opening the lid of the slot, avoid the
place w here dust and w ater may come into the
slot. Al w ays keep the inlet of the slot clean.
1 4 . Al w ays insert the w ireless unit in the correct
direction.
15. Do not press the w ireless activation button
on the w ireless unit too hard and/or press the
button w ith an object w ith a sharp edge.
16. Al w ays close the lid of the slot w hen
operating.
1 7 . Do not remove the w ireless unit from the slot
w hile the po w er is being supplied to the tool.
Doing so may cause a malfunction of the wireless
u n i t .
18. Do not remove the sticker on the w ireless unit.
19. Do not put any sticker on the w ireless unit.
20. Do not leave the w ireless unit in a place w here
static electricity or electrical noise could be
generated.
21. Do not leave the w ireless unit in a place sub-
ject to high heat, such as a car sitting in the
sun.
22. Do not leave the w ireless unit in a dusty or
po w dery place or in a place corrosive gas
could be generated.
2 3 . Sudden change of the temperature may bede w
the w ireless unit. Do not use the w ireless unit
until the de w is completely dried.
2 4 . When cleaning the w ireless unit, gently w ipe
w ith a dry soft cloth. Do not use benzine, thin-
ner, conductive grease or the like.
25. When storing the w ireless unit, keep it in the
supplied case or a static-free container.
26. Do not insert any devices other than Makita
w ireless unit into the slot on the tool.
2 7 . Do not use the tool w ith the lid of the slot dam-
aged. Water, dust, and dirt come into the slot may
c a u s e m a l f u n c t i o n .
28. Do not pull and/or t w ist the lid of the slot more
than necessary. Restore the lid if it comes off
f r o m t h e t o o l .
29. Replace the lid of the slot if it is lost or
damaged.
SAVE THESE INSTRUCTIONS.
FUNCTIONAL
DESCRIPTION
CAUTION:
Al w ays be sure that the tool is
switched off and the battery cartridge is removed
before adjusting or checking function on the tool.
Installing or removing battery
cartridge
CAUTION:
Always switch off the tool before
installing or removing of the battery cartridge.
CAUTION:
Hold the tool and the battery car-
tridge firmly when installing or removing battery
cartridge. Failure to hold the tool and the battery
cartridge firmly may cause them to slip off your hands
and result in damage to the tool and battery cartridge
and a personal injury.
To remove the battery cartridge, slide it from the tool
w h i l e s l i d i n g t h e b u t t o n o n t h e f r o n t o f t h e c a r t r i d g e .
► Fig.1: 1. R e d i n d i c a t o r 2. B u t t o n 3. Battery cartridge
To install the battery cartridge, align the tongue on the
battery cartridge with the groove in the housing and slip
it into place. Insert it all the way until it locks in place
with a little click. If you can see the red indicator as
shown in the figure, it is not locked completely.
CAUTION:
Al w ays install the battery cartridge
fully until the red indicator cannot be seen. I f n o t ,
it may accidentally fall out of the tool, causing injury to
you or someone around you.
CAUTION:
Do not install the battery cartridge
forcibly. If the cartridge does not slide in easily, it is
not being inserted correctly.
15 ENGLISH