Bartscher MS600 Manual page 16

2. Insert the mixing disk with the milk frother
whisk ring at the bottom of the mixing beaker.
3. Fill the mixing beaker with milk.
The maximum filling amount of milk for frothing is
150 ml.
4. Put the lid on the mixing beaker.
5. Press the ON/OFF switch.
As long as milk is frothed, the indicator light is lit in red.
When the milk is frothed, the operation indicator light goes off and the appliance
switches off automatically.
Heating Up Milk
1. Insert the mixing disk at the bottom of the mixing beaker.
2. Fill the mixing beaker with milk.
The maximum filling amount of milk for heating up is 400 ml.
EN
3. Put the lid on the mixing beaker.
4. Press the ON/OFF switch.
As long as milk is heated-up, the operation indicator light is lit in red.
When the milk is heated up, the operation indicator light goes off and the appliance
switches off automatically.
NOTE!
After each use, fill the mixing beaker with a small amount of water to
soften the milk or milk froth residues. Water prevents milk residues and
aromas to deposit and dry-off on the Teflon coating.
This facilitates cleaning and prevents burning of ingredients during
subsequent use.
14 / 16
Installation and operation
Fig. 3
190211