Message Display - Sony DVX-100S Operating Instructions Manual

Message Display

During operation, the following messages are displayed to help you understand easily.
Message Display on the Monitor
"
You can't operate this command now."
"This disc can't be played."
"All discs can't be played."
"Magazine is not loaded."
"Magazine empty"
Message Display on the Master Unit
ERROR
No Mag
No Disc
Push Reset
Cause and/or Corrective Action
•The command you made is not available for the DVD during playback.
, With some DVDs, certain operations are prohibited. It depends on each disc.
•The command you made is not available on the screen currently displayed.
, If you advance to the next step on the screen, the command will become available.
•The region code is neither "the code printed on the back of the unit" nor "ALL."
, Use DVDs with the same region code printed on the back of the unit or with "ALL"
(page 5).
•The audio-visual restricted function is activated.
, Change the parental level. See "Parental setup (Changing the parental level)"
(page 42).
•The colour system of the disc is incompatible with the one on your unit.
, Check the colour system of the disc. See "This Unit Can Play the Following Discs"
(page 5) .
•You tried to play a disc that you cannot play on this unit.
, Load a disc that this unit can play.
•You loaded the disc upside down.
, Load the disc properly.
•The disc is dirty.
, Clean the disc.
•Moisture has condensed on the laser lens of this unit.
, Remove the magazine from this unit and wait for about one hour.
•All of the discs in the magazine are those that this unit cannot play.
, Use the discs that this unit can play.
•You did not insert the magazine.
, Insert the magazine in this unit.
•There were no discs at all in the magazine.
, Insert a disc in the magazine.
Cause and/or Corrective Action
•You tried to play a disc that you cannot play on this unit.
, Load a disc that this unit can play.
•You loaded the disc upside down.
, Load the disc properly.
•The disc is dirty.
, Clean the disc.
•Moisture has condensed on the laser lens of this unit.
, Remove the magazine from this unit and wait for about one hour.
•Disc magazine is not inserted.
, Insert the disc magazine.
•No disc is inserted in the disc magazine.
•Inserted disc(s) is(are) not playable.
, Load at least one playable disc into the disc magazine.
•Operation is disabled for some reason.
, Press the Reset button on the master unit.
49