Resuming Playback; Turning Off This Unit - Sony DVX-100S Operating Instructions Manual

STOP ANGLE
STOPx
PLAY PAUSE
PLAYN
SCAN
SCANm/M
PREV NEXT
PREV.
DISC
DISC+/–
1 2
4 5
7 8
CLEAR
0
During Playback
To
Stop
Pause
Resume playback after pause
Go to the next chapter, track, or scene in
continuous play mode
Go back to the preceding chapter, track, or scene
continuous play mode
Fast forward
Fast rewind
Stop playback and remove the disc
1
* If the resume playback function is activated, you can resume
playback later by pressing N. For details, see "Resuming
playback."
2
DVD/Video CD
*
Both the picture and sound stop during pause.
Audio CD
The sound stops and the elapsed time flashes on the screen.
3
* DVD/Video CD
— Each time you press M or m, the playback speed
switches in steps of 2-, 4-, 8-, 16-, and 32 times. The steps
of speed are rough estimates.
— To decrease the playback speed:
press m during fast forward playback.
press M during fast rewind playback.
— To resume normal playback:
press N.
— During fast forwarding (M) and fast rewinding (m),
the sound stops.
SUB TITLE AUDIO
PAUSEX
MENU LIST
ENTER
NEXT>
SEARCH TITLE
TIME
3
REPEAT
6
A B
9
RETURN PLAY MODE
O
SET UP
Operation
1
Press x*
2
Press X*
Press X or N
Press >
Press .
3
Press M*
3
Press m*
Press Z
Audio CD
— To resume normal playback:
press N.
— During fast forwarding (M) and fast rewinding (m),
the sound stops.
Tip on master unit operation
If . or > is kept pressed during play or pause, fast
forward/ fast reverse playback (2 times only) will start. Release
the pressed button to return to the normal playback.

Resuming Playback

1
During playback, press x to stop.
The unit memorizes the point where you stopped
playback.
• DVD/Video CD
"x" flashes and "Resume---" is displayed on the
screen.
• Audio CD
The elapsed time of the Audio CD is displayed.*
* See "Display Screen (Audio CD)" (page 16).
2
Press N to resume playback.
When the resume playback is activated, playback is
resumed from the point you stopped playback. When
the resume playback is deactivated, playback starts
from the beginning.
Note
The resume playback is deactivated:
- If you press x twice.
- If you eject the disc magazine and insert it again.
- If you remove a disc from the disc magazine.
- If you change the play mode.
- If you start playback after selecting a title, chapter, or track.
- If you change any settings on the setup screen.

Turning off this unit

Press OFF* on the master unit.
* You cannot turn off the power with the wireless remote
commander.
Note
If you press OFF, and then select this unit at the master unit,
playback starts from the point you pressed OFF (Resuming
Playback is activated). When the resume playback is deactivated,
playback starts from the beginning.
15