Information Display - Sony CDP-311 Operating Instructions Manual

w..
iU
Playing a Disc
What is this indication?
no d!5C
This indication appears when there is no disc on
the disc tray.
If you turn on the power with a disc in the tray
Play begins automatically from the beginning of
the disc. By connecting a commercially available
timer, disc play can be started at any desired
time.
Information Display
Figure
When you press & OPEN/CLOSE to close
the tray, or press TIME in stop mode, the
display shows you the following information:
The total number of selections (a)) and the
total playing time of the inserted disc (b)).
Figure E
Each time you press TIME during play, the
display changes to give you the following
information.
8) Elapsed playing time
b) Remaining time in a selection
If the current selection number is over
20, "- - . - -" appears.
c) Remaining time of the disc
However, "- - . - -" appears instead of
the actual time in the following cases.
* If a disc with more than 20 selections
is being played in shuffle play.
*If any one selection the number of
which is greater than 20 has been
programmed.
*If the remaining time exceeds 100
minutes.
Note
The time display mode selected with TIME will
not change until the power is turned off.