Getting Started; Wyrippacking Esse. 2 Csctsaa Cases Sasevishsnessuotusbetscsionnyesgusvadensbtedccatg Cess Dguseestiseesaeeededstecbnedinvepslauanpaneneeas; Hooking Up The System - Sony CDP-CX255 Operating Instructions Manual

Getting Started
Unpacking
Check that you received the following items:
~ © Audio cord (1)
* CONTROL AI cord (1) (supplied for Canadian
models only)
© Remote commander (remote) (1)
¢ Sony SUM-3 (NS) batteries (2)
¢ CD booklet holders (2) and label (1)
car How to use the CD booklet holder
The CD booklet holder helps you locate the disc easily.
After you have inserted discs into the player, you can put
the CD booklet (which comes with a CD) into the
supplied holder. Put two CD booklets facing back to back
into a pocket. Stick the number label on each pocket,
matching the number of the disc slot where you have
inserted the disc. You can put up to 200 CD booklets into
the holders.
Inserting batteries into the remote
You can control the player using the supplied remote.
Insert two R6 (size AA) batteries by matching the +
and - on the batteries. When using the remote, point it
at the remote sensor @ on the player.
'
wy
, When to replace batteries
With normal use, the batteries should last for about six
months. When the remote no longer operates the player,
replace all the batteries with new ones.
Notes
* Do not leave the remote near an extremely hot or humid
place.
* Do not drop any foreign object into the remote casing,
particularly when replacing the batteries.
* Do not expose the remote sensor to direct sunlight or
lighting apparatuses. Doing so may cause a malfunction.
* If you do not use the remote for an extended period of time,
remove the batteries to avoid possible damage from battery
leakage and corrosion. :
qin
Hooking Up the System
Overview
This section describes how to hook up the CD player to
an amplifier. Be sure to turn off the power of each
component before making the connections.
mUNIN COMMAND DIGITAL OUT
(OPTICAL)
CD player
To an AC outlet
To line output (R) To line output (L)
To audio =| Amplifier
cS. : Signal flow
CONTROL A1 MODE
To an AC outlet
What cords will | need?
Audio cord (1) (supplied)