Page 1
INbj027V02_UK Assembly video please scan the QR code .
Page 2
Warning: The storage compartment is not suitable for depositing liquid gas cylinders!...
Page 3
• Read the following instructions carefully and ensure that your barbecue is correctly installed, assembled and maintained. Failure to follow these instructions could cause serious injury and/or damage to property. • Use outdoor only. • WARNING : accessibile parts may be very hot . Keep young children away . •...
Page 8
Before start assemble part 14 must take away the protective plastic cap on the connector...
Page 9
⑦ ⑦ Correct position of side burner tube...
Page 10
3-5mm After assemble side burner, Adjust the pin point insert ignition wire into ignition pin at the burner hole.
Page 13
Warning !!! Identify any leaks after assemble & before use ! ( Refer to Leak Test Instruction, Page 15 ) Below connection are the parts which must test the leakage.
Trouble Shooting Problem Possible cause Solution Burners will not light LP gas cylinder is empty. Replace with full cylinder using the ignition Faulty regulator. Have regulator checked or system replace Obstructions in the burner Clean burner Obstructions in gas jet and hose Clean jets and gas hose Electrode wire loose or disconnected Reconnect wire...
Need help?
Do you have a question about the 846-016 and is the answer not in the manual?
Questions and answers