Safety Consideration; Warranty - Thermo Scientific CC58114PC Installation And Operation Manual

Safety Notes
Safety Considerations
Safety Considerations

Warranty

Thermo Fisher Scientific warrants the operational safety and functions of the
Control Consoles only under the condition that:
• Control Consoles is operated and serviced exclusively in accordance with its
intended purpose and as described in these operating instructions.
• The Control Consoles is not modified.
1-2
Do not modify or use equipment in a manner other than expressly
intended. Modification of equipment other than that for which it is
explicitly designed could cause severe injury or death. Any
customer after-market retrofit violates the warranty of the
equipment.
Do not reconfigure the controller(s). Any reconfiguration of the
control instrument(s) could causes inaccurate reading, faulty
instrument values, and may cause the furnace to become
overheated and start on fire, causing personal injury or death,
product and property damage.
Do not modify or disconnect any safety features provided.
Disconnection of the unit safety features could allow the unit to
become overheated and start on fire, causing personal injury or
death, product and property damage.
Do not use components or materials not specifically designed for
this equipment. Failure to comply with this precaution could result
in damage to equipment used or the furnace and may create an
overheat situation. Also, do not use anything other than OEM
exact replacement equipment and parts. Not using OEM
replacement parts could cause faulty. Instrumentation readings,
inoperable equipment, or temperature overshoot. Both situations
may cause personal injury or death, product, and property
damage.
Before using, user shall determine the suitability and integrity of
the product for the intended use and that the unit has not been
altered in any way. Misapplication may compromise the safety of
the end user or the life of the product.
Thermo Scientific