Before First Use; Settings - Electrolux EW9W8862E9 User Manual

Table of Contents

Advertisement

The Remote Control
activates automatically when
you press the Start/Pause
programme, but it is also
possible to start a washing
programme remotely. This
function is deactivates when
door is open.
When the App is installed and the
wireless connection is complete, you
can activate the Remote Start:
Press and hold the Auto Dry and the
Time Dry buttons simultaneously for a
few seconds. The indicator
the display and the door is locked. Now it
is possible to start the programme
remotely.
To remove the Remote Start, press and
hold the Auto Dry and the Time Dry
buttons simultaneously for a few seconds
until the indicator
display.

11. BEFORE FIRST USE

During installation or before
first use you may observe
some water in the appliance.
This is a residual water left
in the appliance after a full
functional test in the factory
to ensure the appliance is
delivered to customers in
perfect working order and is
no cause for concern.
1. Make sure that all transit bolts have
been removed from the appliance.
2. Make sure that the electrical power is
available and the water tap is open.

12. SETTINGS

12.1 Child Lock
With this option you can prevent that the
children play with the control panel.
• To activate/deactivate this option,
touch the Stains/Prewash and the
Delay Start buttons simultaneously
button to start the
appears on
disappears on the
10.4 Over-the-air update
The App may propose an update for your
appliance.
The update is accepted via App only.
If a programme is running, the App
notifies that the update will start at the
end of the programme.
During the update, the appliance shows
in the display.
Do not switch off or unplug the appliance
during update.
The appliance will usable again at the
end of the update, without any
notification about successful update.
If an error occurs, the appliance shows
in the display: just press any
buttons or turn the knob to return to
normal use.
3. Pour 2 litres of water into the
detergent compartment marked by
.
This action activates the drain system.
4. Pour a small quantity of detergent
into the compartment marked by
5. Set and start a programme for cotton
at the highest temperature without
any laundry in the drum.
This removes all possible dirt from the
drum and the tub.
until the indicator
off on the display.
You can activate this option:
• After you touch the Start/Pause
button: all the buttons and the
ENGLISH
29
.
comes on/goes

Advertisement

Table of Contents
loading

Table of Contents