Electrolux EW9W8862E9 User Manual page 28

Table of Contents

Advertisement

28
www.electrolux.com
read the next paragraph 'Configuring
the appliance wireless connection'.
4. Start the application. Select the
country and language and login with
Your email and password. If you do
not have an account, create a new
one following the instructions in "My
Electrolux".
5. Follow the instructions on the App for
the appliance registration and
configuration.
10.2 Configuring the appliance
wireless connection
1. Press the On/Off
seconds to activate the appliance.
Wait about 10 seconds before
proceeding with wireless
configuration.
2. Select a programme by turning the
programme dial.
3. Press and hold the Auto Dry and the
Mode buttons simultaneously for a
few seconds until a 'click' sounds.
Release the buttons.
the display for 5 seconds and the
indicator
The wireless module begins starting up.
Make sure that you APP is
ready for connection.
4. After about 10 seconds,
(Access Point) appears on the
display.
The access point will be open for about 3
minutes.
button for a few
appears on
starts blinking.
5. Configure the "My Electrolux" app on
your smart device and follow the
instructions to connect the appliance
to your Wi-Fi network.
6. If the connectivity is configured, when
the programme information screen
returns, the indicator
display.
Every time you switch the
appliance on, the appliance
takes about 10 seconds to
connect to the network
automatically. When the
indicator
the connection is ready.
To switch the wireless connection off,
press and hold the Auto Dry and the
Mode buttons simultaneously for a few
seconds until the first acoustic signal.
Release the buttons.
the display for 5 seconds.
If you switch the appliance
off and on again, the
wireless connection is
automatically off.
To remove the wireless credentials,
press and hold the Auto Dry and the
Mode buttons simultaneously for 10
seconds until the second acoustic signal:
appears on the display.
10.3 Remote Start
The Remote Start enables you to start a
cycle in remote control.
is on the
stops blinking
appears on

Advertisement

Table of Contents
loading

Table of Contents