Installation - Electrolux EW9W8862E9 User Manual

Table of Contents

Advertisement

10
www.electrolux.com
Level of protection against ingress of solid parti‐
cles and moisture ensured by the protective cov‐
er, except where the low voltage equipment has
no protection against moisture
Water supply
Water supply pressure Minimum
Ambient temperature
Maximum wash load
Maximum dry load
Spin Speed
This product contains HFC - R134a/GWP1430 0.14 kg fluorinated gas hermetically
sealed.
1) Connect the water inlet hose to a water tap with a 3/4'' thread.

5. INSTALLATION

WARNING!
Refer to Safety chapters.
5.1 Unpacking
WARNING!
Remove all the packaging
and the transit bolts before
installing the appliance.
WARNING!
As you will put down the
appliance on the rear side,
wait about 6 hours before
you use it. This time is
necessary to enable the
compressor to work
properly.
WARNING!
Use the gloves.
1. Remove the external film. If
necessary, use a cutter.
1)
Maximum
Minimum
Maximum
Cotton
Synthetics
Wool
Cotton
Synthetics
Wool
Maximum spin speed
IPX4
Cold water
0.5 bar (0.05 MPa)
8 bar (0.8 MPa)
5 °C
35 °C
10 kg
4 kg
1.5 kg
6 kg
4 kg
1 kg
1551 rpm
2. Remove the cardboard top and the
polystyrene packaging materials.
3. Remove the internal film.

Advertisement

Table of Contents
loading

Table of Contents