1. Einleitung Der Domino 2A verfügt über 4 Eingänge Willkommen bei AER (Eingänge 3 und 4 mit gemeinsamer Klangregelung), Wir freuen uns, dass Sie sich für den Domino 2A Kanal-Mute-Schaltung, Insert-Link, AER-32/24-bit- entschieden haben. Digitaleffekt mit 16 Presets. Sie haben damit einen professionellen, kompakten Alle AER-Verstärkersysteme sind dynamikkontrolliert,...
2. Wichtige Sicherheitshinweise Die folgenden Hinweise dienen der Minimierung des Verletzungsrisikos durch Feuer und Stromschlag. Das Blitzsymbol im gleich- Das Ausrufezeichen im C AU T I O N seitigen Dreieck soll den gleichseitigen Dreieck soll RISK OF ELECTRIC SHOCK DO NOT OPEN Benutzer vor unisolierter, den Benutzer auf wichtige AT T E N T I O N...
Eingang: Ring = Return, zum seriellen = input 3, ring = input 4). Einschleifen von Effektgeräten oder zum 15) power on Verbinden von AER-Amps mit Link-Funktion. Netzschalter (ein/aus), kombiniert mit (s. Abs. 5.5, Seite 9) Gerätestecker (Typ IEC C14) und Fach für Netzsicherung (siehe technische Daten).
5. Funktionsbeschreibung ernsthaften Schäden an Ihrem Verstärker führen! 5.1 Klangregelung Vergewissern Sie sich, daß die Phantomspeisung Die Klangregelung des Domino 2A ist eine hochwer- (siehe 5.4) nicht unabsichtlich tige Klangbeeinflussung, die den natürlichen Ton eingeschaltet ist. Stellen Sie danach alle gewünsch- von Instrumenten und Stimme erhält und Ihnen die...
5.2 Effekte Externe Effekte Darüber hinaus kann ein zusätzliches Effektgerät Der Domino 2A verfügt über einen eingebauten (externer Effekt) an den Verstärker angeschlossen (internen) digitalen 32 bit AER Effektprozessor, werden. Benutzen Sie dazu bitte die auf der Rücksei- bei dem Sie mit den effect select-Drehschaltern te befindlichen Buchsen send und return (send geht für die Kanäle 1/2, bzw.
5.6 Stereo-Simulation 5.5 Phantomspeisung 48-V-Phantomspeisung am Mikrofoneingang Der Domino 2A ist mono – an L-out und R-out liegt jeweils dasselbe Ausgangssignal an. Über Mikrofone, die eine 48-V-Phantomspeisung (P 48) diese Buchsen können Sie aktive AER-Zusatzboxen erfordern, können über einen XLR-Stecker direkt an anschließen (z.B.
5.8 Beispiel für das Verlinken von AER-Amps über den insert-Einschleifpunkt input bass middle treble eff. send gain bass middle treble eff. send mute line/mic clip colour channel one channel two PA-System PA-System effect 2 bass middle treble eff. send select...
We are very happy that you have chosen the Domi- (inputs3 and 4 with shared equalization), channel no 3. You are now the owner of a professional, com- mute, insert-link feature and AER-32/24-bit-digital- pact and powerful 2x100 watts stereo amplifier. The effects with16 presets.
2. Important Safety Instructions The following guidelines shall help minimize the risk of injury through fire or electric shock. The lightning flash with The exclamation point C AU T I O N the arrow head symbol within an equilateral RISK OF ELECTRIC SHOCK within an equilateral triangle is intended to DO NOT OPEN...
6,3 mm stereo-jack-plug, 15) power on tip = send, ring = return, for serial looping of effect-devices or for connecting AER-amps power on/off switch, combined with mains with link-feature. (see para. 5.6, page 10) inlet (IEC C14 type) and compartment for...
4. Starting up 5. Functional characteristics 4.1 Cabling and switching on 5.1 Tone control The tone controls of the Domino 2A are a high- Before connecting to quality sound modification tool that preserves the mains, please ensure that natural tone of instruments and voice and allows you your local mains voltage to apply targeted accentuations.
The intensity of the effect is determined by the exter- nal effects unit. The Domino 2A has a built-in (internal) 32 bit effect The external effect loop works in parallel mode. processor. With the select switch for chanel 1/2 or 3/4 A parallel loop is intended to add the effect compo- you can choose between 16 different effects.
(not stereo) as a precaution. This way the phantom power cannot 3. link between two or more AER-amps with insert- get to the source and possibly damage it. Also make feature (AG8, Domino, Compact ClassicPro) sure that the plugs are fully plugged in.
5.8 Example for the linking of AER-amps via the insert connection input bass middle treble eff. send gain bass middle treble eff. send mute line/mic clip colour channel one channel two PA-System PA-System effect 2 bass middle treble eff. send...
Page 18
6. Technische Daten/Technical specifications Inputs Input impedance: 20 kΩ channel 1/4 Instrument / line input, high impedance, aux in Auxiliary input, e.g. for CD unbalanced Stereo jack socket: 3.5 mm Stereo jack socket*: ¼“ (6.35 mm) Nom. input voltage: 500 mV (–6 dBV) Nom.
Page 19
Footswitch connector Cabinet Birch plywood, thickness: 12 mm (0.47“) footswitch effect int/ext Finish Waterbased acrylic, black spatter finish Connector for a dual footwitch Stereo jack, ¼” (6.35 mm) Tip = internal effect Dimensions and weight on/off Ring = external effect on/off Dimensions Height 360 mm (14.20“)
Need help?
Do you have a question about the Domino 2A and is the answer not in the manual?
Questions and answers