Lanaform 97302830 User Manual page 4

you are on a smooth
surface.
• If water is leaking
from the appliance,
stop using this prod-
uct immediately and
return it to your sup-
plier or its after-sales
department.
• If you are concerned
about your health,
consult a doctor
before using this
equipment.
• If you experience
any pain when us-
ing this device, stop
using it immediate-
ly and consult your
doctor.
• Never use this appli-
ance if your feet are
swollen or inflamed
or if you have a skin
rash.
• This product is a
non-professional
massage device de-
signed to relax tired
muscles. Do not use
this equipment as
a replacement for
medical treatment.
• This device is de-
signed to be used
for a short period
only. We recom-
mend that you use
it for a maximum
period of 15 min-
utes. It must then be
switched off so that
the motor can cool
4
/ 24
down for at least 15
minutes.
• Use of the "Heat &
Fold Spa"device
without consult-
ing your doctor is
strongly discour-
aged for pregnant
women, those sub-
ject to thrombosis
or suffering physical
pain, the cause of
which has not been
defined, as well as
for those wearing
a pacemaker. Use
of the device is also
strongly discour-
aged for diabetics.
FEATURES
• Foot spa
• Heating function up to 41°C
• Infrared lamp
• 2 detachable massage rollers
• 3 interchangeable pedicure accessories
• Stimulating acupressure surface area
• Fits up to size 44
• Can be folded up for easy storage
DESCRIPTION insert_p 1
1 On/off button
2 Reservoir
3 Water jet strips
4 Acupressure points
5 Detachable massage rollers
6 Interchangeable pedicure accessories
a Massage accessory
b Brush
c Abrasive head
7 Heat resistor
8 Infrared lights
9 Maximum water level
10 Splash guard
11 Power cable
12 Power supply
13 Rubber feet
14 Metal handles
INSTRUCTIONS FOR USE
Assembly insert_p 2
1 To unfold your spa, pull on the 2
metal handles located in the base
and pull them out completely. (1)
2 Put one hand in the reservoir and pull
firmly on the side of the spa including
the splash guard to lift it up. (2)
3 Lift up the metal handle on the
same side to jam its end un-
der the rim of the spa. (2)
4 Then pull on the opposite side to
unfold the spa completely. (3)
5 Lift up the metal handle on the
same side to jam its end un-
der the rim of the spa. (3)
6 The "Heat & Fold Spa" is ready for use.
Use insert_p 1
1 Put the appliance on a flat, stable,
hard surface with a non-slip mat
alongside it to avoid any risk of falling.
2 Put the accessories you want to
use in the reservoir (see below).
3 Fill the tank (2) with water at the
required temperature up to "MAX" on
the flexible section of the reservoir to
the left (9). Never fill above this level.
report_p Always immerse the
heating element (7).
4 Plug the device into the mains. Make
sure too that your hands are not wet
and your feet are not in the water.
5 Sit on a chair and put your feet
in the water. Never stand up
in the "Heat & Fold Spa".
6 Then press the on/off but-
ton to start the spa (1).
report_p Never turn on the device
without water in the tank!
7 Press a second time to start the heating
function and infrared lamp. The two
[L / R]
infrared LEDs will light up (8).
info_out When the heating function
has been activated, the water
will gradually heat up. The lower
the starting temperature of the
water, the longer it will take to
heat up again. Fill the reservoir
with tepid water if you want to
speed up the reheating process.
8 The massage does not generally
take more than 10 to 15 minutes.
9 Once the massage has fin-
ished, press the on/off button
again to turn the device off.
10 Finally, empty the contents of the
reservoir from one of the 2 opposite
ends to the splash guard lid. (Fig. 3)
report_p Never pour water over
the on/off button!